Floorex Products Dustmaster DM-2660, Safety & Operator Manual

Page: 6 / 16

DM-2660 Safety & Operators Manual
1800 FLOOREX
PAGE 5. 1800 356 673
Operating Instructions
1. Wear clothes suitable for the job and for the work place
including, safety shoes, hard hat, hearing protection, non-
fogging vented safety goggles, and dust respirator suitable
for dust.
2. Be sure all equipment is tested and tagged prior to use on
any job.
3. Connect hose to the dust extractor via standard 50mm
Hose cuffs. If 38mm hose is more practical, use the smaller
hose after more than 50mm hose. This is to reduce the
speed of the air/dust coming into the Dust Extractor.
4. Make sure the Head is secured via the over center clamps
provided before plugging the machine in to power.
5. Connect the Dust Extractor to suitable power outlet. This is
normally 10A. If you need to connect using extension cords
please consult your supplier to confirm the best size
conductor to use.
6. Always move the Dust Extractor with the handles and not
by pulling the hose. Pulling the machine via the hose could
make the machine tip over and damage occur to the
machine.
7. Keep the Dust Extractor clear of drainage pits and grates or
any such hazard. Failure to comply could result in bodily
injury and or could damage the Dust Extractor or property.
8. Do not attempt to make any adjustments while the Dust
Extractor is in operation. Any adjustments must only be
performed when the Dust Extractor is stopped and power
disconnected.