Air Release Valves
Installation Instructions
Model Maxiair® ½” thru 6”
Flomatic Corporation
Flomatic Corp, 15 Pruyn’s Island, Glens Falls, New York 12801
Phone: 518-761-9797 Fax: 518-761-9798 www.flomatic.com
maxiair
Rev. D
Trouble Shooting Guide
Problem: Possible
Solutions:
Leaks when closed
1. Inspect seat for wear or damage and replace if
needed.
2. If valve is more the 5 years old replace seat.
3. Inspect the float for damage and replace if needed.
If float is damaged contact factory to review possible
sizing or position problems.
Leaking at inlet connection
Tighten valve connection. If valve still leaks remove
valve from system and re-attach with new Teflon tape
or liquid Teflon.
Leaking around the cover
Tighten bolts
Information needed to order repair parts:
Valve Model Number
Valve Size
Valve working Pressure
Limited One Year Warranty:
Flomatic valves are guaranteed against defects of material or workmanship when used
for the services recommended. If, in any recommended service a defect develops due to material or workmanship, and
the device is returned, freight prepaid, to Flomatic Corporation within 12 months from date of purchase, it will be
repaired or replaced free of charge. Flomatic Corporations’ liability shall be limited to our agreement to repair or
replacement of valve only.
Item Description
1 Top
2 Flange
3 Body
4 Gasket
5 Seat
6 Float
7 Bolt
8 Nut
9 Interference
Pin
INLET
OUTLET
