Flomag 3000, Installation And Operation Manual, Page: 27 / 28

F
L
O
M
A
G
3
0
0
0
-
In
st
al
la
tio
n
a
nd
O
p
er
at
io
n
M
an
ua
l
27
FLOMAG 3 0 0 0 S1 F1 -- B1 B1 C1 A1 V1
-- module not fitted
V1 display and keypad
--
module not fitted
A1
active output module 0(4)..20 mA (12 bit) - replaced by A5
A2 active output module 0(4)..20 mA (16 bit) - replaced by A5
A3 active output module 4..20 mA (16 bit) - replaced by A6
A4 passive output module 4..20 mA (16 bit) - replaced by A7
A5
active output module 0(4)..20 mA (16 bit)
A6 active output module 4..20 mA (16 bit) (HART w. mod.H1)
A7 passive output module 4..20 mA (16 bit) (HART w. mod.H1)
B1..B5, E1
--
module not fitted
A7
pasive output module 4..20 mA (16 bit)
C1 RS232 module
D1 RS485 module
D2 communication loop module 0/20 mA
D3
M-Bus
G1
GSM
H1 Bell 202 modem HART compatible (only with module A6 or A7)
-- module not fitted
A7, B1..B5, E1
-- module not fitted
A7 pasive output module 4..20 mA (16 bit)
B1 binary output – passive optoMOS 250V(AD,DC) max.120mA max.4kHz
B2 binary output – passive optoMOS 60V(AD,DC) max.300mA max.10kHz
B3
binary output – active 5 VDC max.10mA max.12kHz
B4 binary output – active 24 VDC max.40mA max.12kHz
B5 binary output – relay 250VAC/1A
-- module not fitted
M1
memory module for data archiving
-- module not fitted
F1 electrochemical electrode cleaning module
F2 Full pipe check module
F3 module with F1+F2 functionality
S1
sensor signal input amplifier module (allways included)
0 Power supply 85-265 VAC
1 Power supply 24 V (18-36 VDC, 18-26 VAC)
2 Power supply 12 V (9-18 VDC, 9-14 VAC)
0 Compact version
1
Remote version
0
Unspecified (working) meter
1 Specified meter
B1..B5, E1
E1 binary input - active (for nonvolatile contacts or open collector)
Converter – marking and label
Tab. Converter marking
Fig. Converter label
Converter in remote version should be always completed with sensor with
the same serial number!