SHEET 4 OF 8
INSERT UPRIGHT TUBES INTO CLAMP WELDMENTS AND ATTACH USING (2) ½” NUTS, HAND TIGHT
ONLY (FIGURE 1.3). ADJUST HEIGHT AND TORQUE TO 70 FT-LBS (FIGURE 1.4).
4X
4X
FIGURE 1.3
FIGURE 1.4
BUNK/CRADLE PAD
DISCLAIMER
DUE TO THE LARGE
VARIETY OF BOAT
HULL DESIGNS, WE
STRONGLY
RECOMMEND THAT
YOU CONSULT WITH
YOUR BOAT’S
MANUFACTURER TO
ENSURE THAT YOU
ARE SUPPORTING
YOUR BOAT
PROPERLY TO AVOID
ANY POTENTIAL
DAMAGE.
NOTE:
UPRIGHTS MAY HAVE TO
BE CUT TO ALLOW FULL
TRAVEL OF CRADLE ONCE
FINAL PLACEMENT IS
ESTABLISHED.
Summary of Contents for FULL LENGTH BUNKS
Page 8: ...SHEET 8 OF 8...
