Floe 510-27500-00 Assembly Instructions And Owner'S Manual Download Page 26

Dock Accessories and Wheel Kit — 10-Year Limited Warranty

Defects in material and workmanship of certain accessories of FLOE dock systems are covered under a 10-year pro-rated warranty. Items covered in this 10-year 
pro-rated warranty include wheel kit legs, wheel kit braces, plastic wheels, benches (except cedar boards), bumpers, ladders, shore-end ramps (except cedar boards), 
support poles, and hammocks.

The pro-rated schedule of these items is as follows:

Year After Purchase 

Consumer Portion  

Year After Purchase 

Consumer Portion

of Current Retail Price  

of Current Retail Price 

3

20%

7

60%

4

30%

8

70%

5

40%

9

80%

6

50%

10

90%

Dock Floats – 12-Year Limited Warranty

Dock floats used on FLOE floating dock systems are warranted to the original owner against cracking, peeling, sloughing, and deterioration from ultraviolet rays, 
while retaining its resiliency against ice and bumps by watercraft under normal usage.

This warranty does not cover any float drum that has been subject to negligence, misuse, alterations, accidents, storm abuse or improper installation and support.

Floats are covered in the two-year parts and labor warranty. In addition, FLOE will provide replacement floats on a non pro-rated basis for the first eight years and 
then pro-rated as below. Replacement labor not included.

Year After Purchase 

Consumer Portion of Current Retail Price 

9

60%

10

70%

11

80%

12

90%

This warranty covers only the cost for replacement of materials due to defects in materials or workmanship, and represents the only warranty authorized by us. In 
order to receive performance under this warranty, all warranty repairs must be authorized in advance by FLOE INTERNATIONAL, INC.

Additional Warranty Information Including Exclusions and Owner’s Rights

FLOE INTERNATIONAL, INC. will not be responsible for any costs incurred for unauthorized repairs or improper assembly. Unauthorized repairs may void the warranty 
on items repaired! Warranty repairs are subject to a $20.00 customer (consumer) deductible co=payment. This warranty does not cover damage resulting from 
overloading of the boat lift, misuse, wind, storm or ice damage, (or any act of God), being struck by any type of watercraft, or negligence. This warranty covers 
personal use and does not apply to commercial or rental use. The manufacturer is not responsible for damage where repairs have been made or attempted by 
others. Items purchased by FLOE INTERNATIONAL, INC. are warranted by the original manufacturer and warranty is extended only to the original retail purchaser. 
FLOE INTERNATIONAL, INC. reserves the right to inspect and perform repairs at its main facility (F.O.B.) McGregor, Minnesota. The customer is responsible for freight 
charges incurred in transporting the warranty product to and from FLOE or an authorized FLOE dealership, with the exception of claims covered by the two-year parts 
and labor warranty that provides service up to 15 miles from the dealer. FLOE INTERNATIONAL reserves the right to inspect and perform rework at its main facility 
(F.O.B.) McGregor, Minnesota. Specifications may change without notice or obligation. 

Completing & Submitting Your Warranty Claim

To receive performance under this warranty, contact your authorized FLOE dealer. Be prepared to provide the following information so that the dealer can complete a 
warranty claim form: receipt and date of purchase; your name, address and telephone numbers; the serial or vehicle identification numbers; and a detailed descrip-
tion of the problem.

THERE ARE NO OTHER EXPRESSED OR IMPLIED WARRANTIES

Our obligations under this warranty are limited to repair or replacement at our discretion, and FLOE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES OF ANY KIND.

This Warranty gives you specific legal rights and you may have other rights which may vary from state to state.

page 2 of 2

Summary of Contents for 510-27500-00





























Reviews: