- 8 -
Remove the two wood tongues from the motor dome,
using a sharp knife.
Put epoxy glue to the motor dome and hook it into the
firewall rib. Additional put the two small triangular balsa
wood rails to the right and left side of the motor dome.
Countersink the four 3 mm holes with a 5 mm drill
Screw the motor to the motor dome, using M3x8 counter-
sunk screws.
Find the correct position of the cowling and fix it with
adhesive tape. Drill two or three 1.2 mm holes through the
cowling and the wood below.
Mount the canopy with the attached 2 mm woodscrews.
You can reinforce the thread in the wood with super liquid
CA glue.
