FLIR X6570sc series, User Manual

Page: 28 / 112

Installing the camera 6
6.4.2.2 Procedure
Follow the procedure below to select and connect the camera:
1. Click the Select camera button.
2. Select the FLIR X6570sc camera.
The camera’s IP address is displayed when connected using GigE.
The Camera Link port is displayed when connected using Camera Link.
3. Click the Connect button to activate the camera connection.
Once connected, the camera control interface is populated with the camera parameters,
and the live image is displayed on the current tab.
6.4.3 Image size adjustment
6.4.3.1 General
The FLIR X6570sc can be set up to use only part of the detector. This allows the camera
can be operated at higher frame rates. The selection is done through the upper part of
the camera control panel.
#T810204; r. AA/43079/43091; en-US 20