FLIR X6530sc Series, User Manual

Page: 58 / 118

Interfaces 9
3. Allow installation of the driver, despite it not being Microsoft trusted software.
4. Configure the network interface by following the procedure in section 9.2.3 Configu-
ration of the network interface , page 53.
9.2.2.2 Replacing an existing driver
9.2.2.2.1 General
When the USB driver has already been installed, follow the procedure below to update
the driver.
9.2.2.2.2 Procedure
1. Disable the Ethernet connection between the camera and the computer.
2. Connect the camera to the computer with the USB cable.
3. Open Control Panel > Device Manager.
4. Under
Network adapters , find the device named FLIR Platinum USB.
5. Right-click and select Update Driver Software .
#T810206; r. AA/43064/43088; en-US 50