Using your SENSORY and PCS
Note: Sensories are assigned to specific users at an Assignment Station, so that all recordings are always
directly associated with that user.
You should alw ays use the specific Sensory that is currently assigned to you.
1. Before first use insert PCS into charging hub until fully charged.
2. Get a charged PCS from a Charging Hub.
3. Connect the Sensory to the PCS.
Always clamp (or release) the cable from the PCS by pressing the Cable Release buttons.
- The 'L' cable is normally used to attach to the PCS when wearing the Sensory.
- The 'T' cable is for when a Sensory is used as a fixed-mount device, or when external power is needed
(via the large USB connector).
4. The Sensory and PCS will go through a startup cycle as soon as they are connected.
Wait for the version number and your User Name to appear on the PCS screen - this indicates that the unit is assigned
to you, is ready to use, and on-board recording has commenced.
5. If you get a message 'Return PCS to Hub' on startup, do not use that PCS - it needs to be fully recharged and its
recordings uploaded. Return it and request a different PCS.
6. While using the unit, you can trigger Alarms, and put the unit in Privacy mode.
The sensory controls are shown overleaf.
Text Messages
Message
Meaning
Message
Meaning
Alarm
Alarm End
Long press on Alarm button starts an
Alarm. Repeat to end Alarm.
- Alarm raised in Control Center.
- Control Center starts recording.
Privacy
(To enter Privacy Mode, press both the Top
& Bottom buttons while in normal mode)
(Repeat to end Privacy Mode)
Privacy mode reminder: HH:mm
(Shows every 5 mins while in Privacy Mode)
Shows time Privacy Mode was started
Event
Event End
Short press on Alarm button starts an
Event. Repeat to end Event.
- Event created without Alarm
- Control Center starts recording
Low Power
Battery is <2% -
Recording will continue but Live viewing via
Cloud connection suspended
If charging commences using 'T' cable,
message still remains until unit is charged
back to 25%
Neighbor Event
User is in range of an Alarm from another
User. PCS will vibrate.
Return to Hub
PCS need to be returned to Charging hub to
update or resolve internal error.
Not Assigned
Sensory has not been assigned to a user
Notes:
1. The PCS handles storage and communications, but when the video from the Sensory is shown live or played back later
on the VMS, it remains associated with the assigned User.
2. Users can even use a replacement PCS's during a shift - for example, if their first PCS is low on battery.
The VMS system will correctly identify and splice the recordings from multiple PCSs.
3. Where activated by the system, each user will get an email for each Alarm or Event containing the related recordings,
so that they can be reviewed.
4. Always allow up to 10 seconds at the end of an event before disconnecting the PCS from the Sensory
5. Take Unit out of Privacy mode prior to disconnecting PCS and inserting into Charging Hub. Failure to do so will result in
Hub showing a steady amber light for that PCS until it is defaulted (all data will offload and will charge as normal)
pr oduct.enter pr is e.s uppor t@flir .com
Version 2
FLIR Sys tem s , Inc.
Tel: +1 888.388-3577
6769 Hollis ter Ave.
Goleta, CA 93117