FLIR Thermal MSX Videoscope Kit, User Manual

Page: 35 / 44

Working with Images and
Video
10
10.1 SD Card Slot
The SD Card slot is located inside the VS290 top compartment. See illustra-
tion below. Do not remove or insert an SD Card with the camera powered up.
Do not use an SD Card that has been formatted by another camera as the file
structure system may differ.
Figure 10.1 SD Card slot in top compartment.
10.2 Capturing Images and Video
First select image mode (single-shot) or Video mode by pressing Menu on the
Settings icon and pressing Menu again at the Recording Mode sub-menu.
Select Video or Single-shot using the navigation buttons and press Menu to
confirm.
Pull and hold the trigger to capture an image or to start recording video. For
images, release the trigger when the filename appears. For video, release the
trigger when the video timer starts. Pull and hold trigger to stop the video
recording.
#NAS100060; r. AA/71942/71942; en-US 31