Explanation
Callout
■
As
File type
, select
AVI (non-radiometric)
or
SEQ (radiometric)
.
■
As
Record mode
, select
Circular
or
Linear
.
Circular
means that the recording
will automatically start over when the internal RAM memory is full. This may be
useful when it is extremely important that the beginning of an event is recorded,
and it is difficult to start the recording at the exact time.
Linear
means that the
recording will start when you click button 11 and stop when the internal RAM
memory is full (unless the recording is stopped manually).
■
Set the frame rate by specifying a number in the bottom row. For example,
setting the frame rate to 2 means 25 or 30 Hz, depending on TV system.
➲
The AVI recording will be saved as a DV-AVI file.
10565303;a2
10
Record a frame sequence
11
Open a saved frame sequence (a *.seq file or an *.avi file)
12
Save the current frame as an IR image
13
Save the frame sequence as a *.seq file or an *.avi file.
14
10.2.2.6
Voice comment
10567503;a3
Figure 10.12
Voice comment
dialog box
If your camera supports Bluetooth® you will need to connect your Bluetooth®
headset to the camera before you can add voice comments. This only needs to be
done once. For information about connecting a Bluetooth® headset, see section
10.2.5.6 – Bluetooth® on page 120
Point to
Voice comment
and press the joystick to display the
Voice comment
dialog
box. A progress bar in the dialog box will indicate the progress of the voice recording.
Using the voice comment feature, you can:
■
listen to a recorded comment, make a pause, and then continue
■
record a new comment, make a pause, and then continue
10
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
91
10 – Camera program
