FLIR TCX series Instruction Manual Download

Page: 66 / 150

Playback (Cameras with

microSD only)

Playback mode allows you to playback video from the camera’s SD / microSD card.

NOTE

Playback is only available if your camera supports on-board recording using an SD / microSD card.

To playback video from the microSD card:

1. Use the calendar to select a day to search for video. The bar on the bottom populates

with video recorded on that day.

2. Click in the time bar to start playback.

1. Click in the calendar to select a day to search for video.

2. Click

. A list appears with video files from the selected day.

3. Click a time to select it.

4. Click

then

to start playback.

#LX400062; r.30885/35920; en-US

Summary of Contents for TCX series























































































































































Search results

Summary of Contents for TCX series

Reviews:

Related manuals for TCX series

Brands by name

Popular brands

FLIR TCX series, Instruction Manual

Search results

Summary of Contents for TCX series

Reviews:

Related manuals for TCX series

Brands by name

Popular brands