Page 8
The information contained in this document pertains to a dual use product controlled for export by the Export Administration
Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to
export or transfer to foreign persons or parties unless otherwise prohibited.
When unpacking the camera, please heed
customary electrostatic-discharge (ESD) sensitive device
precautions including static-safe work station and proper grounding. The camera is placed in a conductive
anti-static bag to protect from electrostatic-discharge damage and safely packaged to prevent damage during
shipping.
4.0
Standard Camera Kit
Components that come standard with the Tau SWIR camera are:
1.
Camera body (includes standard Tau backshell, C-Mount Adapter installed)
2.
2-Wire, 12” lead for TEC power (shown in Figure 5)
3.
Black Cap to cover C-Mount
Electrical Interface
Main Connector
Communication, video, and camera power are all accommodated through the Hirose 50-pin connector
shown in Figure 1 and Figure 2. Pin designations are described in Table 1, Table 2, and Table 3.
Figure 1. Tau SWIR Camera –Hirose Connector
M2x0.4, 4mm deep mounting
holes, 24mm separation, 3 sides.
high-density 50-pin connector:
Hirose #DF12-50DS-0.5V(86)
