FLIR T6xx series, User Manual

Page: 46 / 128

Working with images 15
Note
You can change the function of the Autofocus/Save button under ( Mode ) > Settings > Preferen-
ces . The function can be set to one of the following:
• Preview/Save (Brief depression = Preview; Long depression = Save).
• Save directly (default setting)
• Always preview
15.3 Opening an image
15.3.1 General
When you save an image, the image is stored on a memory card. To display the image
again, open it from the memory card.
15.3.2 Procedure
Follow this procedure:
1. Push .
2. Push the joystick up/down or left/right to select the image you want to view.
3. Push the joystick. This will display the image at full size.
4. Do one of the following:
• To edit the opened image, push the joystick, which will bring up a menu.
• Move left/right to view the previous/next image.
• Push to return to the image overview.
15.4 Adjusting an infrared image
15.4.1 General
An infrared image can be adjusted automatically or manually . You use the button
to switch between these two modes. Note that this only works in live mode and not in
preview/archive mode.
15.4.2 Example 1
This figure shows two infrared images of cable connection points. In the left image, a cor-
rect analysis of the circled cable is difficult if you only auto-adjust the image. You can an-
alyze this cable in more detail if you:
• Change the temperature scale level.
• Change the temperature scale span.
In the left image, the image is auto-adjusted. In the right image, the maximum and mini-
mum temperature levels have been changed to temperature levels near the object. On
the temperature scale to the right of each image you can see how the temperature levels
were changed.
#T559598; r. AB/ 9443/9443; en-US 36