427-0042-00-10 Revision 130 Copyright © 2011 FLIR Systems, Inc.
5
1 WARNINGS
AND
CAUTIONS
Protect Your Investment
The camera should be installed by a trained professional according to local codes and industry-
standard safe practices.
Proper ESD protocol should be followed while working inside the unit.
The camera is a precision optical instrument and should not be exposed to excessive shock or
vibration.
Avoid pointing the system directly at extremely high-intensity radiation sources, such as the sun,
lasers, arc welders, etc. This warning applies whether or not the system is powered.
Great care should be used with your camera’s optics. They are delicate and can be damaged by
improper cleaning. Only clean the lens in the manner described in section 6
Caring for your SR-
Series Thermal Camera
.
Legal Considerations
Camera and audio surveillance may be prohibited by laws that vary from country to country.
Check the laws in your local region before using this product for surveillance purposes.
Support
If you have questions that are not covered in this manual, or need more information, contact
your local FLIR service representative or, 1 (877) 773-3547 inside the US.
In the US, you can reach FLIR Customer Support at (888) 747-FLIR (747-3547).
This equipment must be disposed of as electronic waste. Contact your nearest FLIR
representative for instructions on how to return the product to FLIR for proper
disposal.
Important!
All thermal imaging systems are subject to export control. Export outside of the
US is controlled by the US Government. Please refer to your FLIR regional sales office or
authorized FLIR distributor/reseller for transfers outside of the US and for export
compliance information concerning your application or geographic area.
Warning
!
This guide uses the term
Warning!
to indicate a potentially hazardous situation,
which, if not avoided, may result in bodily harm or injury, damage to the camera, or other
property damage.
