FLIR Screen-EST Kiosk, User Manual, Page: 54 / 58

Update — FLIR Screen-EST and
Camera firmware
13
This chapter describes how you update the FLIR Screen-EST software and the camera
firmware.
13.1 FLIR Screen-EST software update
By default, a check for updates is performed automatically every time you start the FLIR
Screen-EST application. You will be asked to install any available updates.
The settings for software updates are available on the Updates tab, see section 10.3.6
Updates tab .
Note To check for and download updates, internet connection is required.
13.1.1 Offline update
If the FLIR Screen-EST Kiosk is not connected to the internet, you can update FLIR
Screen-EST offline.
1. On a device with internet access, go to https://support.flir.com/screenest .
2. Download the FLIR Screen-EST installer package.
3. Transfer the installation package to the FLIR Screen-EST Kiosk tablet using e.g. a
USB memory stick.
4. On the tablet, start the installation by double-clicking the executable installer file.
5. Read and accept the license terms and conditions.
6. Click
Install .
7. Click Finish .
Note To complete the installation, the tablet may need to be restarted. Follow the in-
structions on the screen.
13.2 Camera firmware update
To update the camera, you need an update package with the firmware update file(s).
To update the camera firmware, do the following:
1. Make sure the power cable is connected to the FLIR Screen-EST Kiosk and to a
power outlet. This powers the camera.
2. Turn on the tablet.
3. Save the firmware update file(s) to the tablet desktop.
4. Run FLIR IP Config from the Start menu or by double-tapping the desktop icon.
5. The FLIR IP Config automatically scans for cameras. When a camera is detected,
FLIR IP Config displays the IP address of the camera.
6. Double-tap the camera in FLIR IP Config. This opens the login view of the camera
web interface in a web browser.
Note If FLIR IP Config finds several cameras, you can identify your camera by the
MAC address printed on a label at the back of the camera (see section 11.3 Camera
connectors and buttons ).
7. Log in with the username admin and the default administrator password available on
the camera calibration certificate. This displays the web interface of the camera.
8. In the camera web interface, go to the Administration tab and select System and
firmware .
9. In the System section, tap Upgrade firmware . This displays a dialog box.
10. Tap Select file . The standard Windows Open dialog box appears.
11. Browse to the location of the firmware file, select the file, and then tap Open .
12. Tap Upgrade firmware .
13. When the upgrade is completed, tap Close and reboot . This restarts the camera.
#T810570; r. AA/72255/72255; en-US 50