FLIR Screen-EST Kiosk, User Manual, Page: 23 / 58

Setup — Screening station 6
• Use the Swap video streams check box to select the display of thermal or visual video.
Visitor window screen elements:
1. Secondary image.
2. Animation.
3. Symbols.
6.4.3 Sound alarm
It is possible to have a sound when the system detects an elevated temperature. You se-
lect this on the
Output tab.
Alarm
• Select the Use sound alarm check box to have a sound when an elevated temperature
is detected.
6.4.4 Save and exit
When all settings are completed, tap Close at the bottom right of the page. This closes
the Settings page.
6.5 Trouble shooting
Note At FLIR Support Center, you can search our knowledge base to find answers to
frequently asked questions. Go to http://support.flir.com.
6.5.1 Must enter license key every time
If you must enter the license key every time you start FLIR Screen-EST, the application
has not been successfully activated.
Follow the instructions in section 5.4 Activate FLIR Screen-EST . When you have entered
the license key, make sure you tap the Validate button (not the Demo mode button).
6.5.2 FLIR Screen-EST cannot find the camera
If FLIR Screen-EST cannot find the camera, try the following:
1. Restart the FLIR Screen-EST application.
2. Restart the tablet.
#T810570; r. AA/72255/72255; en-US 19