FLIR QUASAR CP-3211, User And Installation Manual, Page: 51 / 164

43
September 12, 2016
Installation
CP-3211/CP-4221 User and Installation Guide
5.3.5.2 Pole Thin/Wide Box Mounting
The pole thin/wide box mount must be used in conjunction with the standard or compact wall
mount.
Items needed:
§
Indoor pendant mount kit or outdoor mount kit (standard with outdoor cameras)
§
Standard/compact wall mount package (FLIR camera mounting option available
separately)
§ Pole thin/wide box mount package (FLIR camera mounting option available separately)
Pole thin/wide box mounting package contents:
§
Stainless steel straps x4
§ M8x16 screw x4
§ Spring washer 8 x4
§
Washer 8 x4
§
Sponge x2
Tools required:
§ Stainless steel strap cutter
§
Phillips and flat-head screw drivers
To install the standard/compact wall mount with pole thin/wide box mount
1. Fasten the pole thin/wide box mount to a pole with the supplied stainless straps.
2. Thread the cables through the pole thin/wide box mount.
3. Attach the standard/compact wall mount to the pole thin/wide box mount using the supplied
screws and washers.
4. Thread the cables through the standard/compact wall mount with the cables coming out of the
pendant mount’s outlet. For outdoor cameras, attach the waterproof gasket to the pendant
mount.
5. After threading the cables, block the entry hole with the supplied sponge to prevent insects
from entering. See Standard or Compact Wall Mount , Step 3.
6. Thread the cables through the indoor or outdoor mount kit and attach the mount kit to the
standard/compact wall mount using the supplied screws and washers.
7. For outdoor cameras, adjust the waterproof gasket to the joint.
8. Connect the cables to the camera.
9. Secure the camera to the indoor or outdoor mount kit.
10. Ensure the camera is fixed completely, and that the thread holes on the camera’s fixing plate
and the mount kit are aligned.