427-0011-00-10 Revision 140
Copyright © FLIR Systems, Inc.
20
If necessary, click on the Discovery tab along the right side of the window. When the Discovery
Panel is displayed, click Refresh.
The FLIR camera will appear in the list of Discovered Servers. The asterisk in parenthesis “(*)”
indicates the camera has not been added to the list of Active Servers on the right.
Click on the center bar “>” to move the camera over to the list of Active Servers on the right.
Once the camera has been added to the list of Active Servers, you can click on the Video Wall 0
tab at the top of the screen.
By default, the FSM software will automatically discover sensors in the network, connect to the
first camera it finds, take control of the camera, and display the video from the camera in Video
Wall 0 on the main FSM window.
Select the Video Wall 0 tab and confirm that video is streamed to the
monitor. Confirm it is possible to control the camera using the zoom
controls. For example, click on the zoom button (magnifying glass with
+), and the video will zoom in. Once operation of the camera has been
confirmed, the camera can be configured to an IP address that matches
the installation network.
Once you have verified the basic operation of the camera and successfully streamed video, you
will want to install the camera in its proper location.
Click
Click
