Photon User Guide 412-0035-00-10 Version 100
28
7.1.4
Control Panel
About
Tab
The
About
Tab on the Control Panel, shown in Figure 20, provides information on the Photon
camera along with the ability to load splash screen and camera configuration.
Figure 20:
Photon Control Panel,
About
Tab
Load Splash Screen
. The
Load Splash Screen
option allows users to load a custom splash
screen to the Photon camera for use during startup. The file must be of size 324x256 (approx
83 KB) and a BMP format.
Camera Configuration
. The
Camera Configuration
allows users to load a standard
configuration file (power on defaults) as well as load field upgrades.
Comm. Test
. The
Comm. Test
command is a diagnostic feature for verifying the
communication link between the Control Panel and the Photon camera. Use this command if
you suspect that the camera and Control Panel are not communicating properly. The
message box in the lower left corner of the Control Panel will state “Communication test
completed” if the interface is working properly. If the message box reports “Camera
Timeout”, the link between the camera and Control Panel has been disrupted. Verify that the
camera is still powered and that the serial cable to the PC has not been disconnected. If you
cannot re-establish the Control Panel link, call FLIR Customer Support at (805) 964-9797 for
assistance.
Summary of Contents for Photon Block 2
