6.18. Erase All Screenshots
FLIR Detection
Settings and Commands
Erase
Delete all saved alarms.
Cancel
Keep the saved alarms and return to the superior menu.
6.18 Erase All Screenshots
Options Menu (p.
)
ä
More Options (p.
)
ä
Advanced Options (p.
)
ä
Maintenance (p.
ä
Erase Data (p.
)
ä
Erase All
Screenshots
This command (compare Figure
141
, p.
133
) deletes all screenshots saved in the FLIR
identiFINDER R300’s permanent memory.
Settings and Commands
Erase
Delete all screenshots.
Cancel
Keep the screenshots and return to the superior menu.
6.19
Self Test
Options Menu (p.
ä
More Options (p.
)
ä
Advanced Options (p.
ä
Maintenance (p.
)
ä
Self Test
This command tests the display screen and activates all the alarm annunciators to demonstrate
their proper operation.
Settings and Commands
Start
Start the test. The display should show several test patterns in the main colors red, green
and blue.
Further tests regard the alarm LEDs, the vibrator, and the beeper. Follow the list of tests
displayed (Figure
143
, p.
135
) and verify that the annunciators are working.
Exit
Return to the superior menu.
134
identiFINDER
®
R300/en/2014.4(13623)/Feb2015