FLIR HM-224b Pro, Operator'S Manual

Page: 30 / 42

3—Operating Your HM-Series Camera HM-Series Operator’s Manual
24 Jan 2013
3–8 Auto-Standby Operation
Auto-Standby is a feature of the HM-Series cameras that helps to
guard against draining the batteries prematurely by inadvertently
leaving the camera on. Auto-Standby puts the camera into the
Standby state if the following three conditions are met:
• The camera is in the On state.
• The Auto-Standby switch (STBY) is set to ON.
• No buttons have been pressed for three minutes.
Once these conditions are met you will
see the following message in the display
and the camera will enter the Standby
state after the countdown is finished:
Press any button during this countdown to terminate Auto-Standby
and resume normal operation.
Note
Auto-Standby Switch
Unattended operation of the camera
may require disabling Auto-Standby.
Select OFF to turn off Auto-Standby.
Select ON to turn on Auto-Standby.
If Auto-Standby is off, a reminder message will
appear in the display each time the camera enters
the On state.
Pressing any button during an Auto-Standby countdown will only
terminate the countdown and abort the Auto-Standby.
The normal function of the button will not occur.
HM_Series_Operators.book Page 24 Friday, January 18, 2013 4:27 PM