FLIR GFx320, User Manual

Page: 75 / 164

Working with measurement tools 20
20.1 Laying out a measurement tool
20.1.1 General
To measure a temperature, you use one or several measurement tools, such as a spot-
meter, a box, etc.
20.1.2 Procedure
Follow this procedure to lay out measurement tool:
1. Turn the mode wheel to or .
2. Push the button to display a menu.
3. Move the joystick left/right to go to the Edit tab.
4. Move the joystick up/down to select the measurement tool you want to lay out.
5. Push the joystick. The measurement tool has now been created on the screen.
20.2 Moving or resizing a measurement tool
20.2.1 General
You can move and resize a measurement tool.
20.2.2 Procedure
Note This procedure assumes that you have previously laid out a measurement tool on
the screen.
Follow this procedure to move or resize a measurement tool:
1. Turn the mode wheel to or .
2. Push the button to display a menu.
3. Move the joystick left/right to go to the Edit tab.
4. Move the joystick up/down to select the measurement tool that you want to move or
resize.
5. Push the joystick to display a menu.
6. Move the joystick up/down to select
Move or Resize .
7. Move the joystick up/down and left/right to move or resize the measurement tool.
8. Push the joystick to confirm.
9. Push the button to leave the setup mode.
20.3 Creating & setting up a difference
calculation
20.3.1 General
A difference calculation returns the difference between the values of two known meas-
urement results, or between the value of a measurement result and the reference
temperature.
20.3.2 Procedure
Note This procedure assumes that you have previously laid out at least two measure-
ment tools on the screen.
#T810169; r. AN/42241/42268; en-US 63