FLIR FLIR T5 series User Manual Download

Page: 95 / 115

Pairing Bluetooth devices

You can use the camera with the following Bluetooth devices:

• METERLiNK devices (FLIR meters).
• Bluetooth-enabled headsets.

If supported by your mobile phone, you can also share the phone’s internet connection
with the camera via Bluetooth.

Note

The Bluetooth protocol is limited in terms of data transfer and best suited for up-

load of single images. For upload of videos and folders with several images, it is recom-
mended to use Wi-Fi.

Before you can use a Bluetooth device with the camera, you need to pair the devices.
The Bluetooth functionality is managed from the

Settings

menu. You can also enable/dis-

able Bluetooth on the swipe-down menu. For more information, see section 6.5.5

Swipe-

down menu

Follow this procedure:

1. Push the navigation pad to display the menu system.

2. Select

(

Settings

) and push the navigation pad. This displays the

Settings

menu.

3. Use the navigation pad to select

Connections

Bluetooth

4. Make sure Bluetooth is enabled by toggling the

Bluetooth

switch.

Note

You also need to ensure that the external Bluetooth device is in visible mode.

On the mobile phone, you must make sure that Bluetooth is enabled, that the phone
is in discovery mode, and that Bluetooth tethering is enabled.

5. Select

Available devices

and push the navigation pad.

6. Wait until a list of available Bluetooth devices is displayed.
7. When a Bluetooth device is found, select the device to add it, and begin the pairing

procedure. The device is then ready to be used.

Note

• You can add several devices.
• You can remove a device by selecting the device and then selecting

Unpair device

• After adding a METERLiNK device, such as the FLIR MR77 or FLIR DM93, the result

from the meter will be visible in the result table and stored with the images. For more
information, see section 22

Fetching data from external FLIR meters

• After adding a Bluetooth-enabled headset, it is ready to be used for adding voice an-

notations. Adding a Bluetooth-enabled headset automatically disables the built-in mi-
crophone and speaker.

#T810253; r. AL/84068/84441; en-US

Summary of Contents for FLIR T5 series




















































































































Search results

Summary of Contents for FLIR T5 series

Reviews:

Related manuals for FLIR T5 series

Brands by name

Popular brands

FLIR FLIR T5 series, User Manual

Search results

Summary of Contents for FLIR T5 series

Reviews:

Related manuals for FLIR T5 series

Brands by name

Popular brands