427-0033-00-12 Version 110
February 2019
34
This document does not contain any export-controlled information.
Advanced Configuration
signal state when equal to one indicates that the heater is on. The heater can be turned on under
thermostat control for approximately one hour with the De-Ice button on the Live Video page.
3.1.2
Input/Output (IO) Page
The IO Info page shows a summary of the status of all GPIO signals.
3.1.3
Video Setup
Video:
By default, two video streams are enabled for the camera: Video 0 and Video 1. Both video
streams are available for viewing from a client program such as FLIR Latitude, a stand-alone video
player, or a third-party VMS (including ONVIF systems).
Table 3-1: GPIO Labels
Heater_GPIO44
Internal heater control output signal
Alarm Input
User GPIO signals are enabled by default.
General Purpose Input/Output (GPIO), pg. 6
, and
.
Alarm Output
