FLIR Exx series, User Manual

Page: 81 / 278

Working with measurement tools 15
15.1 General
To measure a temperature, you can use one or more measurement tools, e.g., a spotmeter
or a box.
15.2 Adding/removing measurement tools
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select ( Measurement ) and push the navigation pad. This displays a submenu.
3. Use the navigation pad to select one of the following:
• Select ( No measurements ) to remove all tools.
• Select ( Center spot ) to add a center spot.
• Select ( Hot spot ) to add a hot spot detection within a box area.
• Select ( Cold spot ) to add a cold spot detection within a box area.
• Select ( User preset 1 ) to add user preset 1. (Not available in all camera
models.)
• Select ( User preset 2 ) to add user preset 2. (Not available in all camera
models.)
4. Push the navigation pad to confirm and exit the menu mode.
15.3 Editing user presets
15.3.1 General
A user preset is a measurement tool, or a group of measurement tools, with predefined
characteristics.
#T810190; r. AI/41890/41890; en-US
69