FLIR EXTECH RH520 User Manual Download Page 10

RH520-EU_ENG  V4.2    3/10 

10

MAX-MIN DISPLAYS 

1. Press 

the 

VIEW

 button in the Standard View to display the highest (MAX) and lowest 

(MIN) temperature and RH readings from all of the stored measurement records. 

2. When 

viewing 

the highest 
readings, the 
MAX indicator 
will switch on. 
When viewing 
the lowest 
readings, the 
MIN icon will 
switch on. 

3. The 

cursor 

will 

move to the 
location of the MIN or MAX reading within the graph. If not within the graph currently 
displayed, the cursor will move to the right-most position and the graph will shift 
accordingly so that the relevant data point can be viewed. 

4. Use 

the

 VIEW

 button to step through the highest and lowest temperature readings and 

then the highest and lowest RH readings. When the MAX or MIN indicator is ON under 
the temperature reading digits, the display is showing the MAX or MIN temperature. 
When the MAX or MIN indicator is ON under the RH reading digits, the display is 
showing the MAX or MIN relative humidity. 

ALARM DISPLAYS 

1. Press 

the 

ALARM

 button from the Standard View to analyze the most recent alarm 

activity (temperature or humidity), if any. The ALARM display icon and the relevant 
upper (temperature) or lower (RH) graph pixel will flash. 

2.  The cursor will move to the location within the graph. If not within the graph currently 

displayed, the cursor will move to the right-most position and the graph will shift 
accordingly so that the relevant data point can be viewed. 

3. Press 

the 

ALARM

 button again to view the second most recent set of Alarms (if no 

alarms, the Standard View will appear) 

4. Press 

the 

ALARM

 button again to view the third most recent set of Alarms (if no 

alarms, the Standard View will appear) 

5.  This procedure can continue until no further alarms exist and pressing the 

ALARM

 

button will only bring up the Standard View 

6.  In the example diagram, the RH520 is showing a high temperature alarm (MAX and 

ALARM indicators on). 

 

 

 

 

 

 

 

 

MAX or MIN indicator
is ON when in the
MAX or MIN mode

50

C

MAX Temperature
Alarm Mode

C

50

www.calcert.com

[email protected]

1.888.610.7664

0

5

10

15

20

25

30

Summary of Contents for EXTECH RH520















Reviews: