PQ-12-EU-EN V1.0 01/12
3
Probe Description
1. Current Sensing Jaws
2. Jaw Trigger
3. 1200A-200A-20A range switch
4. Signal output plug ( +, red )
5. Signal output plug ( -, black )
6. DCV power plug
Operation
1.
Connect the “A1” signal output cables to the matching input sockets
on the top of the analyzer.
2.
Connect the “A1” power cable to the matching power socket on the
top of the analyzer.
3.
Set the "1200A-200A-20A” range switch to the range appropriate for
the application.
Note: Make sure the range set on the clamp matches the range
set in the analyzer.
4.
Connect the “A2” and “A3” clamps as above, if needed.
5.
Press the "Trigger" to open the jaws and clamp around a single
conductor.
6.
Power on the power analyzer
1
2
3
4
5
6
www.
.com
1.800.561.8187
