
17.1
Color alarms
17.1.1
General
By using color alarms (isotherms), anomalies can easily be discovered in an infrared im-
age. The isotherm command applies a contrasting color to all pixels with a temperature
above, below, or between the set temperature levels. The camera also features isotherm
types that are specific to the building trade: condensation and insulation alarms.
You can make the camera trigger the following types of color alarms:
•
Above alarm
: This will apply a contrasting color to all pixels with a temperature above
the specified temperature level.
•
Below alarm
: This will apply a contrasting color to all pixels with a temperature below
the specified temperature level.
•
Interval alarm
: This will apply a contrasting color to all pixels with a temperature be-
tween two specified temperature levels.
•
Condensation alarm
: Triggers when the camera detects a surface where the relative hu-
midity exceeds a preset value.
•
Insulation alarm
: Triggers when there is an insulation deficiency in a wall.
17.1.2
Image examples
This table explains the different color alarms (isotherms).
Color alarm
Image
Above alarm
Below alarm
#T810190; r. AJ/46209/46209; en-US
85
Summary of Contents for E75
