FLIR DNR214 Instruction Manual Download

Page: 205 / 220

Connecting PTZ Cameras to the NVR

2. Click the

Tour

tab.

3. Under

Patrol No.

, select the tour you would like to configure.

4. Under

Preset

, select a preset you would like to add to the tour.

5. Click

Add Preset

6. Repeat steps 4 and 5 to add additional presets to the tour.

NOTE

Click

Del Tour

to clear all presets from a tour.

To run a tour:

• Under

No.

, select the number of the tour you would like to go to and click

20.2.3

Pattern

Patterns automatically cycle the camera between two positions.

To create a pattern:

1. Click

to open the

PAN/TILT/ZOOM

menu.

#LX400094; r.43927/43955; en-US

195

Summary of Contents for DNR214





























































































































































































































Search results

Summary of Contents for DNR214

Reviews:

Related manuals for DNR214

Brands by name

Popular brands

FLIR DNR214, Instruction Manual

Search results

Summary of Contents for DNR214

Reviews:

Related manuals for DNR214

Brands by name

Popular brands