FLIR DNR214, Instruction Manual

Page: 202 / 220

Connecting PTZ Cameras to the
NVR
20
You can connect PTZ cameras (not included) to the system. You must use FLIR network
PTZ cameras with the system. FLIR network PTZ cameras can accept PTZ commands di-
rectly through the Ethernet cable. There is no need to run special wiring to use PTZ
cameras.
20.1 Controlling a PTZ Camera (Local NVR)
1. In Live View, click the channel that has the PTZ camera connected to open in full-
screen.
2. Right-click and click PTZ . Enter the system user name and password if prompted. The
PTZ menu opens.
3. Use the on-screen PTZ controls to control the camera.
PTZ Controls
1. Direction keys : Click to pan and tilt the camera. Click SIT to stop the current action.
2. Mouse PTZ : Click to activate mouse PTZ mode. In mouse PTZ mode:
• Click and drag to move the camera.
• Use the scroll wheel to zoom in and out.
• Right-click to exit and return to normal PTZ controls.
3. Zoom/Focus/Iris : Click +/- to adjust the zoom, focus, and iris.
4. Advanced controls : Click to open advanced PTZ controls.
5. Speed : Enter the PTZ speed.
20.2 Advanced PTZ Controls
Advanced PTZ controls can be used to save camera positions and cycle through various
positions, and automate camera actions.
To open advanced PTZ controls:
• Click the arrow in the PTZ control window to open advanced controls.
#LX400094; r.43927/43955; en-US
192