FLIR CB-3102, User And Installation Manual

Page: 93 / 104

Accessing the CB-3102 via a Web Browser
July 21, 2016 Ariel CB-3102 User and Installation Guide 85
To configure color settings
1. In the Color section, configure the following settings:
Brightness
̶
Set the image brightness between -100 to 100 , which provides
the highest brightness. The default is 0 .
Contrast
̶
Set the image contrast between -100 to 100 , which provides the
highest contrast. The default is 0 .
Saturation
̶
Set the image saturation -100 to 100 . The lower the number, the
closer the image is to a grayscale (i.e., monochrome or black-and-white)
image. The higher the number, the deeper the color image (i.e., reds will be
redder and blues will be bluer). The default is
0 .
Hue
̶
Set the image hue between - 100 to 100 , which provides the deepest
hue. The default is 0 .
To configure mirror flip settings
1. In the Mirror Flip Setting section, from the Orientation drop-down list, select one of the following:
Flip
̶
This setting flips the image upside-down.
Mirror
̶
This setting views the image from a different angle.
Both
̶
This setting views the image upside-down from a different angle.
OFF (default)
White Balance
The White Balance screen is used to create the best color rendition.
To set the White Balance mode
1. From the Mode drop-down list, select one of the following options:
ATW
–
In ATW mode, color is continuously adjusted according to the color
temperature of the scene illumination. This is the default setting.
Figure 100: White Balance ATW Mode Screen
Auto
–
In Automatic mode, the color in a scene is automatically adjusted
according to the ambient lighting between 2500°K to 10000°K.
Figure 101: White Balance Auto Mode Screen