IMPORTANT:
This camera includes an Auto Mechanical IR Cut Filter. When the
camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
See the full OSD menu tree below:
On-Screen Display (OSD) Menu
To use the OSD menu:
1. In Live View, click the channel that has the camera connected to open in
full-screen.
2. Right-click and click Pan/Tilt/Zoom. Enter the system user name and
password if prompted. The PTZ menu opens.
3. Click the arrow in the PTZ control window to show advanced controls.
4. Click
. The OSD menu appears over the camera image.
5. Use the on-screen controls to configure menu items:
•
Up / down arrows:
Select menu items.
• Left / right arrows:
Change values for menu items.
• Esc:
Exit the OSD menu.
• Enter:
Confirm selection.
Select
Return
to return to the previous menu, or
Exit
from the main menu
to exit.
NOTE:
These instructions are based on current MPX DVR interface. If you
are not able to access your DVR’s OSD menu by following these steps,
please use the instructions in your DVR manual instead.
You can configure the camera’s advanced settings on an MPX DVR using
the OSD menu.
Format
Video Mode
Backlight Mode
Image Adjustment
Image Mode
Sharpness
Brightness
Contrast
Saturation
Sharp Suppress
Gamma
2 DNR
3 DNR
Exposure
Exposure Mode
Exposure Level
Exposure Speed
Anti-flicker
White Balance
Day/Night
Language
Advanced
Camera Title
Mirror
Horizontal Mirror
Vertical Mirror
D-Zoom
Lens Type
Audio Mode
Smart IR
Privacy Mask
RS485 Setup
(service only) Address
System Information
Factory default
Exit
Package Contents
C243MT2 Series
Quick Start Guide
English Version 2.0
www.flir.com/security/pro
Safety Precautions
• Use an appropriate low-voltage power cable to prevent fire or
electrical shock.
• Make sure to install the camera in an area that can support the
camera weight.
• There are no user serviceable parts inside the camera. Please do not
disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning material.
Please use a soft cloth to clean the lens cover.
• Do not point the cameras directly towards the sun or a source of
intense light.
2.1MP Discreet Vandalproof
MPX Audio Dome Camera
• 2.1MP Discreet Vandalproof MPX Audio Dome Camera
• Mounting Kit
• Mounting Template
• Allen Key
• Power Pigtail
C243MT2_QSG_EN_R1
ATTENTION:
A REGULATED (UL / CSA APPROVED) power supply is REQUIRED
for use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty
.
FLIR Systems, Inc., Copyright © 2016
As our products are subject to continuous improvement, FLIR
Systems Inc. reserves the right to modify product design,
specifications and prices, without notice and without incurring
any obligation. E&OE
flir.com/security/pro
VISIT
IT’S ALL ON THE WEB!
