FLIR C23 Series, Manual

Page: 23 / 80

Advanced Menu 3
To configure DPC:
1. From the main menu, use the control stick to select ADVANCED . Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select SPECIAL . Push the middle of the control stick to
confirm.
3. Move the control stick ↑ / ↓ to select DP COMP . Push the middle of the control stick to
confirm.
4. Select THRESHOLD , then move the control stick ← / → to set the threshold for dead
pixel detection.
5. Select DEFECT DET , then push and hold the middle of the control stick.
3.7 Reset to Default Settings
Resetting the camera to default settings will revert all OSD menu items to their out-of-the-
box state.
CAUTION
Resetting to default settings cannot be reversed.
To reset to default settings:
1. From the main menu, use the control stick to select ADVANCED . Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select RESET .
3. Push and hold the middle of the control stick for 4 seconds to reset the camera to de-
fault settings.
#LX400044; r. 2.0/22410/22410; en-US
19