![background image](http://html1.mh-extra.com/html/flir/blackfly-s/blackfly-s_installation-manual_2305971009.webp)
3 Blackfly S Installation
After the download is complete, the Spinnaker setup wizard begins. If the wizard does not start automatically, double-
click the .exe file to open it. Follow the steps in each setup dialog.
3.3
Installing Your Blackfly
S—Cased Models
1. Install the Tripod Mounting Bracket (optional)
The ASA and ISO-compliant tripod mounting bracket attaches to the camera using the included
screws.
2. Attach a Lens
Unscrew the dust cap from the lens holder to install a lens. Note: the camera can be used with a removable 5 mm C-
mount adapter.
3. Connect the interface Card and Cable to the Camera
Plug the interface cable into the host controller card and the
camera. The cable jack screws can be used for a secure
connection.
When the camera is first connected, the operating system automatically installs the camera driver. Camera drivers are
available with the Spinnaker SDK installation.
a. If using PoE, connect a powered Ethernet switch or Ethernet power injector in between the card and the
camera.
4. Plug in the GPIO connector if required
GPIO can be used for power, trigger, and strobe.
5. Confirm Successful Installation
Run the SpinView application:
Start->All Programs-> Point Grey Spinnaker->SpinView
The SpinView application can be used to test the camera's image acquisition capabilities.
Changes to your camera's installation configuration can be made using the SpinView application.
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide
5