Accessing the CM-3102 via a Web Browser
December 12, 2018
Ariel CM-3102 User and Installation Guide
87
In the
Day/Night Switch Control
section, configure the following settings:
Mode
The Day/Night switch activates the IR Cut (IRC) filter for electronic day/night operation.
Three modes are available:
Auto, Color,
and
B/W
.
Auto
Select
Auto
for automatic operation according to the ambient light level. The
camera converts from
Day
(color) mode to
Nigh
t mode (monochrome/black and white)
automatically at nighttime or in low-light conditions. When there is sufficient light, the
camera converts automatically from
Night
mode to
Day
mode. This is the default setting.
Color
Select
Color
for daylight operation. This deactivates IR mode by putting the
camera into
Day
mode.
B/W
Select
B/W
(black and white) for nighttime operation. This activates IR mode by
putting the camera into
Night
mode.
Time
Select
Fast, Normal
, or
Slow
to set the reaction time of the IRC filter. When set to
Fast
,
the filter switches faster between
Day
and
Night
modes. The default setting is
Normal
.
Sensitivity
Use the slider to set the sensitivity between
Low
and
High
when switching from
Day
to
Night
mode or
Night
to
Day
mode. When set to
High
, the camera automatically switches
between
Day
and
Night
modes upon minor changes in light intensity. When set to
Low
, the
camera automatically switches between
Day
and
Night
modes upon major changes in light
intensity.
In the
IR Control
section, configure the following settings:
Mode
Select Auto, ON,
or
OFF
. The default setting is
Auto
.
LED Brightness
Select
High, Medium,
or
Low
. When set to
High
, the camera switches with
almost no delay between
Color
and
B/W
modes. The default setting is
High
.
Click
Reset
if you want to return to factory default settings.
www.
.com
1.800.561.8187
