FLIR 72501-0101, User Manual

Page: 52 / 146

Handling the camera 13
• Switch between two latest palettes : Switch between the two last-used color palettes.
For more information, see section 16.5 Changing the color palette , page 64.
• Switch temperature range : Cycle through the camera temperature ranges. For more
information, see section 28.1.2 Camera temperature range , page 105.
Additional options for the hardware buttons and :
• Autofocus : One-shot autofocus of the infrared camera.
• Continuous autofocus : Switch between the enabled/disabled continuous autofocus
functions.
• Switch screen rotation On <> Off : Switch between enabled/disabled screen rotation.
• Save : Save an image.
• Save + Prompt for note : Save an image and display the note annotation tool.
• Save + Prompt for table : Save an image and display the table annotation tool.
• Save + Prompt for voice annotation : Save an image and display the voice annotation
tool.
• Save + Prompt for sketch : Save an image and display the sketch annotation tool.
• Save + Select annotation from menu : Save an image and display the annotation tool
menu.
• Preview : Display a preview image.
• P Prompt for note : Display a preview image and the note annotation tool.
• P Prompt for table : Display a preview image and the table annotation tool.
• P Prompt for voice annotation : Display a preview image and the voice annota-
tion tool.
• P Prompt for sketch : Display a preview image and the sketch annotation tool.
• P Select annotation from menu : Display a preview image and the annotation
tool menu.
13.11.2 Procedure
Follow this procedure:
1. Push/press and hold the programmable button. This displays the Programmable but-
ton menu.
2. Move the joystick up/down to select one of the functions. Push the center of the joy-
stick to confirm.
13.12 Using the camera lamp as a flash
13.12.1 General
The camera lamp can be used as a flash for the digital camera. When the flash function
is activated, the camera lamp will flash when an image is saved by pushing the Save but-
ton fully down.
You can also turn on the camera lamp to use it as a flashlight.
13.12.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to ( Settings ).
3. Push the joystick to display the Settings menu.
4. Select Device settings and push the joystick.
5. Select Lamp & laser and push the joystick.
#T559954; r. AT/65353/65353; en-US 38