LEARNING
Flipper can copy (“learn”) the IR signals from your existing remote
control. Each button is programmed separately. When learning
TV signals, use the
TV
button; when learning
STB
functions, use
the STB button.
Do this procedure in low light, as light can interfere with the IR
signal.
1. Place Flipper and your device remote on a table with the front
facing each other;
2. On Flipper, press and hold TV (or STB) and
On/OFF
at the
same time till light starts to flash. Release;
3. Press and release the key you want to copy, say
VOL +
; light
turns solid.
4. Press and release the same key (say VOL+) on your device
remote till light starts flashing; Once blinking, the learning
process for that key is done.
5. Keep repeating till all the keys are copied;
6. Press
TV
to exit.
7. Check the buttons to see if they copied the correct signal. If
not, repeat the process as needed until all buttons learn the
desired function. It may take a few tries to learn all signals.
9