Flintec FT-111 AN, Technical Manual

Page: 131 / 146

FT-111(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019 Page 130 of 146
3 ± 2d
4 ± 3d
5 ± 4d
6 Disable
01000110 70 R/W Stability Time
(1) (2)
Refer to par. [517] page 61
01000111 71 R/W Unit
(1) (2)
0 g
1 kg
2 t
3 lb
4 No unit
5 N
6 kN
7 kLb
01001000 72 R/W Range
(1) (2)
0 Single range
1 2 x Multi Range
2 3 x Multi Range
3 2 x Multi Interval
4 3 x Multi Interval
01001001 73 R/W Capacity-1
(1) (2)
Refer to par. 523 on page 62
01001010 74 R/W
Decimal
point-1
(1) (2)
0 XXXXOO
1 XXXXXO
2 XXXXXX
3 XXXXX.X
4 XXXX.XX
5 XXX.XXX
01001011
75
R/W Increment-1
(1) (2)
0 X1
1 X2
2 X5
01001100 76 R/W Capacity-2
(1) (2)
01001101 77 R/W Decimalpoint-2
(1) (2)
01001110 78 R/W Increment-2
(1) (2)
01001111 79 R/W Capacity-3
(1) (2)
01010000 80 R/W Decimalpoint-3
(1) (2)
01010001 81 R/W Increment-3
(1) (2)
01010010 82 R/W
Limit of
Indication
(1) (2)
0 Over indication after Max
1 1 division more than Max
2 5 division more than Max
3 9 division more than Max
4 2% more than Max
5 5% more than Max
01010011 83 R/W Tare type
(1) (2)
0 Subtractive tare
1 Additive tare
01010100 84 R/W Maximum tare
(1) (2)
Refer to par. [526] page 62
01010101 85 R/W Secondary unit
(1) (2)
0 g
1 kg
2 t
3 lb
4 No unit
5 N
6 kN
7 kLb
Table 11-3
– Expanded command list
(1) Write this command after writing values to 1
st
Dword (Output) then apply this command with New CMD.
(2) To access the related value, read 1
st
Dword (Input).