Doc No.
0096489
Page
3
of
29
V1.2 Issued 17 Aug 2020
1.
Product Description
The CCWR is a wireless variant of our CC1 pump-off control load cell. The CCWR in conjunction
with an appropriate load cell can transmits polished rod load wirelessly, which solves the
industry wide problem of cable failures. After months of development in the field, working
hand-in-hand with end users, our design addresses the most demanding concerns raised.
The CCWR technology sets our product apart from all wireless products currently available in the
market. The primary advantage is extremely low power consumption. Despite the low power
consumption, the product can deliver a continuous flow of data, high signal strength and long
battery life. We also offer position sensing capability which is synchronized with the load
measurement. This eliminates the need for Hall effect sensors or inclinometers with costly
maintenance associated. The wireless enclosure also incorporates an independent
compartment for both the wireless technology and the battery. This allows for easy, single
handed access to the battery for replacement in the field. We carefully specified a pre-wired D-
cell battery is inexpensive and commercially available worldwide.
•
Continuous Flow of Data: 100 Readings per Second.
•
Low Power Consumption: 12-18 month Battery Life.
•
High Signal Strength: > +12dBm, 30m-300m Transmission.
•
HazLoc Approved: UL Rated Class 1, Division 1 environments (see label for full approval).
•
On-Board Position: ±2% Accuracy
•
Security: Proprietary Wireless Transmission Protocol
•
Ease of Use: Independent Battery Access, Commercially Available Battery.
•
Weatherproof: IP67 rating, Rated for use in -70°F to 175°F (-55°C to 80°C).
1.1.
Accessories
•
Base Unit (Receiver).
•
Antenna.
•
Extension Cable.
•
Magnetic Cable Clamps (4x).
•
Remote Unit (Transmitter).
•
Lithium Battery.
•
User Manual.
1.2.
Optional Accessories
•
P/N 52-0093380 – Pole Mount U Bolt Bracket.
•
P/N 52-0089758 – DIN Rail Mounting Bracket.
