2. Long press the LIGHT SWITCH button for 5-6 seconds, the light will flash
quickly
5x to
confirm that is paired for 1 remote control now.
To pair and use the remote with more than 1 lamp in the same/more rooms/spaces
(optional to buy more lamp sets separately at
1. Make sure the lamp is ON.
2. Long press the LIGHT SWITCH button for 5-6 seconds, the light will flash
slowly
5x to
confirm that the lamp is paired for the use with more than 1 remote control.
Note: Make sure when you to this process that other optional bought lamps are switched
OFF before pairing.
SECURITY AND IMPORTANT SAFETY INSTRUCTIONS:
When using electrical products, certain precautions must be followed, including the
following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
This IP20 product is suitable for indoor use.
Please use the rated input voltage power supply of the product as mentioned on the back
label.
Do not install near a gas device or other sources with a similar heating process.
Do not use the product outside its intended use.
Read and follow all instructions that are indicated on the product or supplied with it.
Keep this manual for future reference.
INSTRUCTIONS FOR USE AND MAINTENANCE:
In case of non-use, store the product in a cool and dry place away from direct sunlight.
CAUTION:
•
NON-Replaceable LED lights!
