Flinn Mini Magnetic Stirrer Owner’s Manual
continued
2
Operation
1. Place magnetic stirrer in front of you and remove black waterproof rubber cap. Plug the AC power adapter into the mag-
netic stirrer and the power cord into a power source. When power source is connected, a green light will appear on the
power cord.
2. Place the container with solution on the magnetic stirrer and place a stir bar into container. The container should be placed
in the center of the magnetic stirrer bed.
3. Press “on/off” button to turn magnetic stirrer on. The pilot light will appear red when the power is on.
4. Change the mode of the magnetic stirrer using the “Mode” button. Select either the forward and reverse mode or the one-
way mode.
5. Speed rotation can be adjusted through the “Rev” button. Five different speeds are available.
6. Activate the stirrer with the “Start/Stop” function. When stirring, a green light will be activated indicating that the device
is on. If you want the device still on, but not stirring, press the “Start/Stop” button again and a red light will appear.
7. When turning the device off, click the “on/off” button to the “off” option and the indicator light will no longer be red.
8. Optional: Set a countdown timer using the “timing” button. Press the button once to select the timer. Using the up and
down arrows, set the desired time and press the button again to start the timer. There are two functions for the timer:
a. Set the timer to the desired time and start the timer. When the timer reaches zero, the unit will start to spin.
b. Start the stirring on the unit. Set the timer to the desired stir time and start the timer. When the timer reaches zero, the
unit will stop spinning.
Specifications
• Intelligent chip design
• ABS plastic outer shell and anti-slip foot pads to ensure stirring stability
• Splash proof sealed components
• LED display screen
• Working diameter: 110 mm
• Maximum stirring capacity: 5,000 mL
• Power: DC 12V
• Dimensions: 160 × 120 × 65 mm
• Weight: 1.3 lbs
Maintenance
WARNING: For your own safety, make certain the device is unplugged before maintaining your magnetic stirrer.
Troubleshooting
Symptom
Cause
Solution
Not turning on
Check power supply cord
Plug firmly into the socket
Not turning on
Check power supply cord
Replace cord if fraying
Not turning on
Check fuse
Replace the fuse
Limited 1-year Warranty
Flinn Scientific, Inc. warrants the microscope against manufactures defect for one year from the date of purchase. Please
contact Flinn Scientific at [email protected] or 1-800-452-1261.
© 2016 Flinn Scientific, Inc. All Rights Reserved.
