Install elevator/rudder pushrod
s
Note:
When installing the rudder pushrod, make sure the tail gear is
centered, then install the rudder pushrod and adjust the plastic clevis to center
the rudder.
1. Use glue to attach the rudder horn on the rudder.(as the
left photo shown).
2. Use rudder pushrod to connect the tail gear steering arm
and rudder horn.
Elevator pushrod size
Rudder pushrod size
Elevator pushrod mounting hole
Rudder pushrod mounting hole
Steering pushrod size
Steering pushrod mounting hole
Pushrod diameter : Ø 1.2mm
Pushrod diameter : Ø 1.2mm
Pushrod diameter : Ø 1.2mm
Assembly
A
B
C
D
A
B
C
D
1.
Insert one side of elevator pushrod A ,through plastic
tu
be B, to
the servo arm C.
2.Snap
the clevis of elevator pushrod to the rudder horn D.
1.
Insert one side of rudder pushrod A ,through plastic tube B, to the servo arm C.
2.Snap
the clevis of rudder pushrod to the rudder horn D.
6
Spitfire
MK
.
IXc
Item
No
.:
FLW203
68mm (2-4/5")
545mm
(21-1/2")
597mm
(23-1/2")
