| Components required for installation
|
| Flightcell Iridium Modem Installation Manual
Page
5
of
12
|
3
Components required for installation
3.1
Connectors and fasteners
The modem is connected to a wiring harness which is in turn connected to a Flightcell DZM (or a
PC/embedded device).
Table 2 shows the terminating connectors and fasteners used with the modem.
Connectors
Main connector
M24308/4-2F (DA-15 Male)
Antenna connector
TNC
Fasteners
4 x M4 screws or bolts sized to fit mounting surface
Table 2. Connectors and fasteners required for your modem installation
3.2
Antenna
The Flightcell Iridium Modem requires an antenna installed on the outside of the fuselage, or in a
location with a clear view of the sky (for standalone installations).
Table 3 shows recommended Flightcell antennas. These can be obtained from Flightcell International or
your authorised Flightcell dealer.
Antenna
Suitable for
part number
Dual Flat Antenna L1 GPS/Iridium BNC/TNC White TSO Cert
All aircraft - DZMx ANP_00012
Single Flat Antenna Iridium TNC
Stand alone
ANP_00010
Table 3. Recommended Flightcell Iridium antennas
