Installation / Operation Manual
System Control Unit
16.03.2021 | V1.04
-21-
5.7
Available Accessories
Part No.
Name
Description
10-135
Wiring Harness Kit SCU
Shielded cables for the connection of the SCU Lane A, B and C to
BRP Rotax 912/915 iS engines. Including power supply wires. Open
wire ends at the side of the ECU. Length 2 m / 6.5 ft.
10-148
Wiring Harness SCU
Display/Front Panel
Prewired shielded harness for the connection of the Front Panel or
the Display Panel to the SCU. Length 1 m / 3.3 ft.
01001-132
SCU Front Panel
Please refer to chapter 4.3
01001-134
SCU Display Panel
Please refer to chapter 4.2
10-110
Startpower
Relay Kit
Kit for integration of the start power relay
Includes relay and cables for connection to the EMU
Open ends on EMU side to allow for custom integration
Length 1 m / 3.3 ft.
10-072
Fuel Pressure
Sensor Kit
Includes the following items:
•
10-070 (Harness Fuel Pressure Sensor)
•
10-806 (Hollow Screw)
•
664365 (Fuel Pressure Sensor)
664365
Fuel Pressure Sensor
Original BRP Rotax Fuel Pressure Sensor with a range of 1 to 11 bar.
10-070
Wiring Harness Fuel
Pressure Sensor
Prewired shielded harness for fuel pressure sensor.
Open end on EMU side to allow for custom integration.
Length 2 m / 6.5 ft
10-806
Hollow Screw
Adapter to mount the fuel pressure sensor on the fuel rail.
10-085
Connector Kit Auxiliary
EMU/SCU
Manufacturing kit for Auxiliary connector
Includes shell, connector housing and contacts
Requires M22520 crimping tool
21008-716
SLPC Connection Harness
Prewired shielded harness for governor control
Open end on SCU side to allow for custom integration. Length 3 m /
10 ft.
10-140
Start Key Switch 9iS
Starter Key Switch for Rotax 912iS / 915iS engines. Switching of:
LANE A / LANE B, Fuel Pumps MAIN and AUX, EMU/SCU, Ground
Shortcut (OFF) and Starter
10-316
Wire Harness SCU,
prefabricated
Custom harness for the auxiliary connector
Fully prewired on both ends
Cable length and configuration information needed
10-193
Power Supply Unit
EMU/SCU
Power Supply Unit for the EMU and SCU, Input: 100 - 230 VAC,
Output: 12 VDC, 5A. Connector for EMU/SCU
P-853-12
Propeller Governor 912iSC
MT Propeller governor for SLPC function. 12 V version.
P-853-95
Propeller Governor 915iS
MT Propeller governor for SLPC function. 12 V version.
10-225
Mounting Kit MT Propeller
Governor
Mounting set with 4 screws for mounting the MT governor on Rotax
iS engines
10-234
Mounting Tool MT
Propeller Governor
Mounting tool for MT propeller governors
10-273
Backup Power Switch
2-pole Switch for the Rotax iS Backup Power function
10-274
Toggle Switch
Switch for power supply of the EMU
Table 5-11: Harnesses and Accessories
