6/24
o 16-pin (2x8) Doepfer standard eurorack shrouded header
o User-sele5V supply
System bus
Onboard regulated supply
• Included
o Module
o 9” 16-pin to 10-pin & 16-pin power cable
o (4) M3x1.5x6 mounting screws
o (4) nylon washers
Functional Features
•
IMP noise core audio source, generated by the nonlinear het-
erodyning of a pair of oscillators. The IMP has eight frequency
regions (Domains) of operation, from semi-random sub-audio
impulses to above audio range, used as the primary frequency
modulation (FM) source for the VCO. The output is also avail-
able to each signal chain as well as an independent output jack.
Frequency of oscillation is controlled by Coarse and Fine joysticks with
multiple Control Voltage (CV) inputs and other controls. The joysticks
have breaking input jacks for controlling external signals, and non-
breaking output jacks to allow the signal to be used externally as well
as control the IMP.
•
Voltage-Controlled Oscillator (VCO) with Square, Ramp, Saw, Trian-
gle, and Sine, waveforms available to each signal chain along with
independent output jacks for each waveform. The VCO has two user-
selectable ranges:
1 Volt per Octave (1V/Oct) covering ~19Hz to ~44kHz.
Low-Frequency Oscillator (LFO) covering ~750Hz down to
~0.0015Hz (~11 minutes per cycle).
The VCO can be modulated by the internal IMP noise core or by
external modulation sources, and the modulation amount (depth) of either
can be controlled by dial and CV.
•
2 Audio signal chains consisting of a Voltage-Controlled Filter (VCF)
(bypassable) and a Voltage-controlled Amplifier (VCA), each with
breaking inputs and outputs (I/O). These I/O allow the VCF and VCA
to be used independently or as inserts to the signal chain to allow
external effects to be added. The two VCA outputs can also be used to
provide stereo imaging and effects.
The VCF are Voltage-Controlled Filters. Filter band width and Gain are
Summary of Contents for Infernal Noise Machine
Page 1: ...flight of harmony ...
Page 24: ...24 24 f h ...