Document Number:
MAN
– FDFDSDIVCS-4-5(4-10)
Rev:
D
Revision Date:
10/29/2014
Page 4 of 18
©
2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
General Information
The FDSDIVCS-4-5 is a 4 input, 5 output video crosspoint switch and the FDSDIVCS-4-10 is a
4 input, 10 output crosspoint switch. These crosspoint switch components are the central video
component for in-flight entertainment. This hardware device simplifies video wiring by using 75
ohm coax to transmit HD video to onboard displays. Non-blocking switching permits a
connection of any HD-SDI input to any HD-SDI output. Switching is controlled through CAN,
RS485 or momentary ground switches. It is used with the following components:
All models of HD-SDI Monitors,
Composite to HD-SDI Converter
VGA to HD-SDI Converter
HDMI to HD-SDI Converter
HD-SDI Cameras
Depending on the amount of outputs required would depend on which crosspoint switch is
used.
Back View
FDSDIVCS-4-5 - The bottom row from left to right are outputs 1-5, the top row from left
to right are inputs 1-4.
FDSDIVCS-4-10
The top row of outputs is: 6-10( left to right)
The center row of inputs is: 1-4(left to right)
The bottom row of outputs is:1-5(left to right)
