Document Number:
MAN – FD600CAM-2/FD600CAM-2
Ver 28V
Rev:
D
Revision Date:
03/16/2011
Page 5 of 12
Installation Instructions
All cabin entertainment equipment, such as the FD600CAM-2 and the FD600CAM-2 Ver
28V, should be installed on a non-essential bus and have a dedicated circuit breaker. It is
a requirement that a switch be installed in the cockpit so that the pilot can de-energize the
entertainment system should it become necessary.
Mounting from the cockpit headliner is suggested. Excessive sunlight will make the video
image hard to see. Mounting inside the cockpit and out of direct sunlight will provide a
“visor” to the camera lens.
Remember to set the camera pointing down at an approximately 60° angle, as this will
optimize the picture for takeoff and landings. When looking at the image while on the
ground have the horizon 2/3 of the way up the video screen in the cabin.
Power
The FD600CAM-2 is a 12VDC camera that requires 90mA power and can operate at 9 -
15VDC. The FD600CAM-2 Ver 28V is a 28VDC camera that requires 45mA power and
can operate at 15 - 29VDC.
