Rev:
G
Revision Date:
10/31/2014
Page 11 of 18
MAN
– FD141CV
Operation Instructions
The FD141CV is continuously on but can be de-energized by removing power from the
entertainment system. No pilot or aircrew action is necessary during flight or ground
operation.
The passengers will be able to change the video output from the FD141CV using the video
source select button on the display, or remotely throughout the cabin with the included IR
remote. Point the IR remote at the top of the LCD to make changes.
When applying 28VDC power, the display will turn on and look for a valid input on the last
known source. If no input is found, the display will go to standby mode. Pressing the Select
button will select new video input.
Button Controls
Located at the top of the FD141CV LCD are eight buttons.
