Flight Data Systems FDS 400-301 Operator'S Manual Download Page 53

Page: 53 / 61

SRVIVR™ Interface Supplement

Operators manual

FDS 400-301

Figure 40.0 SRVIVR™ Recorder Operations - Information

Figure 41.0 SRVIVR™ Recorder Operations - Self Test

9.3 Audio Operations

The SRVIVR™™ audio can be monitored in real time. To listen to audio, plug headphones

into the audio jack on the bottom of the HHMPI, see

Figure 3.0, ”HHMPI bottom view”,

on page 7

Press the

and

down

buttons to select which channel you want to listen to.

Shortcut

button 2

increases the volume and

shortcut button 3

decreases the volume. See

Figure 45.0, ”CVR Live Audio volume control”, on page 58

9.4 Live Data View

Three streams of real time data can be monitored from the SRVIVR™:



Live ARINC-717, see

Section 4.4, ”Viewing live flight data” on page 26



Monitoring of Captain’s Clock on the ARINC-429 GMT BUS, both labels 125 and 150.



Monitoring of Rotor Frequency in Hz.

Note

The CVFDR must be configured appropriately for playback,

that is, not currently recording. Refer to the component maintenance

manual for instructions.

Summary of Contents for FDS 400-301






























































Search results

Summary of Contents for FDS 400-301

Reviews:

Related manuals for FDS 400-301

Brands by name

Popular brands

Flight Data Systems FDS 400-301, Operator'S Manual

Search results

Summary of Contents for FDS 400-301

Reviews:

Related manuals for FDS 400-301

Brands by name

Popular brands